Buckling analysis of laminated composite plates with an elliptical/circular cutout using FEM

Basit Öğe Kaydı
dc.authoridAtas, Akin -- 0000-0002-2185-465X
dc.contributor.authorKömür, Mehmet Aydın
dc.contributor.authorŞen, Faruk
dc.contributor.authorAtaş, Akın
dc.contributor.authorArslan, Nurettin
dc.date.accessioned13.07.201910:50:10
dc.date.accessioned2019-07-29T19:26:22Z
dc.date.available13.07.201910:50:10
dc.date.available2019-07-29T19:26:22Z
dc.date.issued2010
dc.departmentMühendislik Fakültesi
dc.description.abstractIn this study, a buckling analysis was carried out of a woven-glass-polyester laminated composite plate with an circular/elliptical hole, numerically. In the analysis, finite element method (FEM) was applied to perform parametric studies on various plates based on the shape and position of the elliptical hole. This study addressed the effects of an elliptical/circular cutout on the buckling load of square composite plates. The laminated composite plates were arranged as symmetric cross-ply [(0 degrees/90 degrees)(2)](s), and angleply [(15 degrees/-75 degrees)(2)](s), [(30 degrees/-60 degrees)(2)](s), [(45 degrees/-45 degrees)(2)](s). The results show that buckling loads are decreased by increasing both c/a and b/a ratios. The increasing of hole positioned angle cause to decrease of buckling loads. Additionally, the cross-ply composite plate is stronger than all other analyzed angle-ply laminated plates.
dc.identifier.doi10.1016/j.advengsoft.2009.09.005
dc.identifier.endpage164en_US
dc.identifier.issn0965-9978
dc.identifier.issn1873-5339
dc.identifier.issue2en_US
dc.identifier.scopusqualityQ1
dc.identifier.startpage161en_US
dc.identifier.urihttps://doi.org/10.1016/j.advengsoft.2009.09.005
dc.identifier.urihttps://hdl.handle.net/20.500.12451/5565
dc.identifier.volume41en_US
dc.identifier.wosWOS:000272858700007
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherELSEVIER SCI
dc.relation.ispartofADVANCES IN ENGINEERING SOFTWARE
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectBuckling
dc.subjectLaminated Composites
dc.subjectElliptical Hole
dc.subjectFEM
dc.titleBuckling analysis of laminated composite plates with an elliptical/circular cutout using FEM
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
komur-mehmet aydin-2010.pdf
Boyut:
501.42 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Makale Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu