Buckling analysis of laminated composite plates with an elliptical/circular cutout using FEM
Yükleniyor...
Tarih
2010
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
ELSEVIER SCI
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, a buckling analysis was carried out of a woven-glass-polyester laminated composite plate with an circular/elliptical hole, numerically. In the analysis, finite element method (FEM) was applied to perform parametric studies on various plates based on the shape and position of the elliptical hole. This study addressed the effects of an elliptical/circular cutout on the buckling load of square composite plates. The laminated composite plates were arranged as symmetric cross-ply [(0 degrees/90 degrees)(2)](s), and angleply [(15 degrees/-75 degrees)(2)](s), [(30 degrees/-60 degrees)(2)](s), [(45 degrees/-45 degrees)(2)](s). The results show that buckling loads are decreased by increasing both c/a and b/a ratios. The increasing of hole positioned angle cause to decrease of buckling loads. Additionally, the cross-ply composite plate is stronger than all other analyzed angle-ply laminated plates.
Açıklama
Anahtar Kelimeler
Buckling, Laminated Composites, Elliptical Hole, FEM
Kaynak
ADVANCES IN ENGINEERING SOFTWARE
WoS Q Değeri
N/A
Scopus Q Değeri
Q1
Cilt
41
Sayı
2
