The micro-scale modeling by experimental study in PEM fuel cell

Basit Öğe Kaydı
dc.authoridTaner, Tolga -- 0000-0002-3065-1942
dc.contributor.authorTaner, Tolga
dc.date.accessioned13.07.201910:50:10
dc.date.accessioned2019-07-29T19:27:56Z
dc.date.available13.07.201910:50:10
dc.date.available2019-07-29T19:27:56Z
dc.date.issued2017
dc.departmentTeknik Bilimler Meslek Yüksekolulu
dc.description.abstractThis study posed parameters effects to the PEM fuel cell performance by an experimental work. The aim of this study is to investigate performance effects of PEM fuel cells and to optimize water conditions as well as fuel cell performance. Platinum-plated catalyzed anode performance was demonstrated for the micro-scale modeling by experimental study in PEM fuel cell. Therefore, time dependent voltage and current parameter changes were observed for the performance analysis in the experimental study. PEM fuel cell was enhanced by adjusting the anode plate, air feed pump and hydrogen fuel quantities. This study is to determine about optimizing some parameters (pressure, flow rate, voltage) for the fuel cell performance. The result of this study was found to be 2.62 x 10(-7) [kg/s] average of water production and generated 42.5 [kJ] H-2 energy. In conclusion, performance efficiency was found to be around 52%. These results demonstrated that water production was also very significant for the PEM fuel cell durability. PEM fuel cell energy efficiency increases while the mass flow is in a certain range and under pressure atmospheric conditions.
dc.description.sponsorshipAksaray University Scientific Research Projects Agency [2016-030]
dc.description.sponsorshipI would like to thank the Aksaray University Scientific Research Projects Agency for supporting this project under the 2016-030 project.
dc.identifier.doi10.18186/journal-of-thermal-engineering.331755
dc.identifier.endpage1526en_US
dc.identifier.issn2148-7847
dc.identifier.issue6en_US
dc.identifier.scopusqualityQ3
dc.identifier.startpage1515en_US
dc.identifier.urihttps://doi.org/10.18186/journal-of-thermal-engineering.331755
dc.identifier.urihttps://hdl.handle.net/20.500.12451/5958
dc.identifier.volume3en_US
dc.identifier.wosWOS:000431978900001
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherYildiz Technical University
dc.relation.ispartofJOURNAL OF THERMAL ENGINEERING
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectPEM Fuel Cell
dc.subjectWater Production
dc.subjectHydrogen Gas
dc.subjectPerformance
dc.subjectEnergy Efficiency
dc.titleThe micro-scale modeling by experimental study in PEM fuel cell
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
taner-tolga-2017.pdf
Boyut:
822.08 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu