The use of SISO ARX models in the determination of the damage to dams

Basit Öğe Kaydı
dc.contributor.authorGülal, Engi?n
dc.contributor.authorErdoğan, Hediye
dc.contributor.authorAykut, Nedim Onur
dc.contributor.authorErkaya, Halil
dc.date.accessioned13.07.201910:50:10
dc.date.accessioned2019-07-16T09:15:05Z
dc.date.available13.07.201910:50:10
dc.date.available2019-07-16T09:15:05Z
dc.date.issued2011
dc.departmentMühendislik Fakültesi
dc.description.abstractModal characteristics of engineering structures can be determined via dynamic observation in scope of system identification and they can be used for a variety of purposes, including model updates, damage assessment, active control, and original design re-evaluation. This paper presents the use of an autoregressive with eXogenous inputs (ARX) model to assess the impact of horizontal displacements in the Oymapinar Dam in Antalya province, Turkey, during the first reservoir filling stage. Besides, displacements in the dam after the filling stage are predicted. There is a high linear correlation between the displacements of the body of the dam and the first filling phase of the reservoir. An ARX model of the dam without damage is created using displacements predicted from a 3D finite element model of the dam and the changes in water level. The displacements in the dam observed in the first filling phase are recalculated using water level changes for damaged or undamaged cases, observed displacements, and the parameters of the undamaged ARX model. The standard deviations of the residuals calculated from the ARX model of the undamaged dam are statistically compared for different confidence intervals using the standard deviations of residuals of the ARX model of the undamaged or damaged dam's observations, and it was determined that there was no dangerous damage to the dam. In addition, the observed displacement values were extended in different scales and standard deviations of these displacements are calculated using the ARX of the undamaged dam model. These standard deviations and the one calculated from undamaged model of the dam were compared, and it was determined that 55mm of displacement could be dangerous for the dam. Finally, the displacements in the dam for different water levels in the operation phase (after filling) were predicted using the ARX model and were found to be consistent with the measured displacement values.
dc.identifier.doi10.1177/1056789510369333
dc.identifier.endpage1001en_US
dc.identifier.issn1056-7895
dc.identifier.issn1530-7921
dc.identifier.issue7en_US
dc.identifier.scopusqualityQ1
dc.identifier.startpage979en_US
dc.identifier.urihttps://doi.org/10.1177/1056789510369333
dc.identifier.urihttps://hdl.handle.net/20.500.12451/4280
dc.identifier.volume20en_US
dc.identifier.wosWOS:000293697900002
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSage Publicition
dc.relation.ispartofInternational Journal of Damage Mechanics
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectOymapinar Dam
dc.subjectFinite Element Model
dc.subjectARX
dc.subjectReservoir Water Level
dc.subjectDamage
dc.titleThe use of SISO ARX models in the determination of the damage to dams
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
gulal-engin-2011.pdf
Boyut:
781.01 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu