Optimization of process parameters affecting cutting force, power consumption and surface roughness usıng taguchi-based gray relatıonal analysıs in turnıng aısı 1040 steel

Basit Öğe Kaydı
dc.contributor.authorAkgün, Mahir
dc.date.accessioned2022-02-28T05:51:20Z
dc.date.available2022-02-28T05:51:20Z
dc.date.issued2022
dc.departmentTeknik Bilimler Meslek Yüksekokulu
dc.description.abstractThis study focuses on optimization of cutting conditions and modeling of cutting force (Fc), power consumption (P), and surface roughness (Ra) in machining AISI 1040 steel using cutting tools with 0.4mm and 0.8mm nose radius. The turning experiments have been performed in CNC turning machining at three different cutting speeds Vc (150, 210 and 270m/min), three different feed rates f (0.12 0.18 and 0.24mm/rev), and constant depth of cut (1mm) according to Taguchi L18 orthogonal array. Kistler 9257A type dynamometer and equipment's have been used in measuring the main cutting force (Fc) in turning experiments. Taguchi-based gray relational analysis (GRA) was also applied to simultaneously optimize the output parameters (Fc, P and Ra). Moreover, analysis of variance (ANOVA) has been performed to determine the effect levels of the turning parameters on Fc, P and Ra. Then, the mathematical models for the output parameters (Fc, P and Ra) have been developed using linear and quadratic regression models. The analysis results indicate that the feed rate is the most important factor affecting Fc and Ra, whereas the cutting speed is the most important factor affecting P. Moreover, the validation tests indicate that the system optimization for the output parameters (Fc, P and Ra) is successfully completed with the Taguchi method at a significance level of 95%.
dc.identifier.doi10.1142/S0218625X22500299
dc.identifier.endpage-en_US
dc.identifier.issn0218-625X
dc.identifier.issue-en_US
dc.identifier.scopusqualityQ3
dc.identifier.startpage-en_US
dc.identifier.urihttps:/dx.doi.org/10.1142/S0218625X22500299
dc.identifier.urihttps://hdl.handle.net/20.500.12451/9242
dc.identifier.volume-en_US
dc.identifier.wosWOS:000771286400009
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherWorld Scientific
dc.relation.ispartofSurface Review and Letters
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectAISI 1040 Steel
dc.subjectCutting Force
dc.subjectMachining
dc.subjectMulti-response Optimization
dc.subjectPower Consumption
dc.subjectSurface Roughness
dc.titleOptimization of process parameters affecting cutting force, power consumption and surface roughness usıng taguchi-based gray relatıonal analysıs in turnıng aısı 1040 steel
dc.typeArticle

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu