Comparison of input parameters regarding rock mass in analytical solution and numerical modelling
Yükleniyor...
Tarih
2016
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Pergamon-Elsevier Science
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Characteristics of stress redistribution around a tunnel excavated in rock are of prime importance for an efficient tunnelling operation and maintaining stability. As it is a well known fact that rock mass properties are the most important factors affecting stability together with in-situ stress field and tunnel geometry. Induced stresses and resultant deformation around a tunnel can be approximated by means of analytical solutions and application of numerical modelling. However, success of these methods depends on assumptions and input parameters which must be representative for the rock mass. However, mechanical properties of intact rock can be found by laboratory testing. The aim of this paper is to demonstrate the importance of proper representation of rock mass properties as input data for analytical solution and numerical modelling. For this purpose, intact rock data were converted into rock mass data by using the Hoek-Brown failure criterion and empirical relations. Stress-deformation analyses together with yield zone thickness determination have been carried out by using analytical solutions and numerical analyses by using FLAC(3D) programme. Analyses results have indicated that incomplete and incorrect design causes stability and economic problems in the tunnel. For this reason during the tunnel design analytical data and rock mass data should be used together. In addition, this study was carried out to prove theoretically that numerical modelling results should be applied to the tunnel design for the stability and for the economy of the support.
Açıklama
Anahtar Kelimeler
Numerical Modelling, Analytical Solution, Hoek-Brown Failure Criterion, FLAC(3D)
Kaynak
Journal of African Earth Sciences
WoS Q Değeri
N/A
Scopus Q Değeri
Q1
Cilt
124
