Failure behavior of two parallel pinned/bolted composite joints

Basit Öğe Kaydı
dc.contributor.authorPakdil, M.
dc.contributor.authorSen, F.
dc.contributor.authorÇakan, A.
dc.date.accessioned13.07.201910:50:10
dc.date.accessioned2019-07-16T09:20:17Z
dc.date.available13.07.201910:50:10
dc.date.available2019-07-16T09:20:17Z
dc.date.issued2011
dc.departmentMühendislik Fakültesi
dc.description.abstractIn this study, the failure behavior of two parallel pinned/bolted composite joints was investigated, experimentally. The laminated composite plates were produced from glass fibers and epoxy matrix. During the tests, various joint geometries and ply orientations were considered to decide the optimum joint geometry and suitable stacking sequence of the laminated composite plates for two parallel pinned/bolted joints. For these reasons, the distance from the free edge of the plate to hole diameter ratio (E/D) was changed from I to 5, the distance between two parallel holes to hole diameter ratio (K/D) was selected as 2 and 5, the distance from the lateral edge of the plate to hole diameter ratio (N/D) was taken as 2 and 3. The laminated plates were composed from 8 laminas to stuck onto together with three different orientations as [0 degrees(2) / 30 degrees(2)](s), [0 degrees(2) / 45 degrees(2)](s) and [0 degrees(2) / 6 degrees(2)](s). The experiments involved both pinned and bolted joint. Experimental results indicate that failure behaviors of pinned/bolted composite joints are strictly influenced from both orientations of laminated plates and geometrical parameters.
dc.description.sponsorshipMustafa Kemal University [MKU-BAP (2007)-07.D0101]
dc.description.sponsorshipThis project was supported by Mustafa Kemal University (Project No: MKU-BAP (2007)-07.D0101). The authors desire to express their thanks to Izoreel Firm personals, particularly Murat Eroglu, in Izmir-Turkey, for their effort during the producing of the composite materials and preparation of specimens.
dc.identifier.doi10.1017/jmech.2011.13
dc.identifier.endpage127en_US
dc.identifier.issn1727-7191
dc.identifier.issn1811-8216
dc.identifier.issue1en_US
dc.identifier.scopusqualityQ2
dc.identifier.startpage121en_US
dc.identifier.urihttps://doi.org/10.1017/jmech.2011.13
dc.identifier.urihttps://hdl.handle.net/20.500.12451/5077
dc.identifier.volume27en_US
dc.identifier.wosWOS:000289387300013
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherCambridge University Press
dc.relation.ispartofJournal of Mechanics
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectFailure behavior
dc.subjectBolted joints
dc.subjectPinned joints
dc.subjectBearing strength
dc.subjectFailure mode
dc.titleFailure behavior of two parallel pinned/bolted composite joints
dc.typeArticle

Dosyalar

Koleksiyon

Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu