Sodium-induced phase shift in α-NaMnO2 and electrochemical properties of the full cells using hard carbon anodes derived from regional olive leaves

dc.authorid0000-0002-4590-907X
dc.contributor.authorDoğan, Ebru
dc.contributor.authorÖzcan, Sibel
dc.contributor.authorAksu Canbay, Canan
dc.contributor.authorKarta, Mesut
dc.contributor.authorDepci, Tolga
dc.contributor.authorAltın, Serdar
dc.date.accessioned2025-07-16T10:14:56Z
dc.date.available2025-07-16T10:14:56Z
dc.date.issued2025
dc.departmentSabire Yazıcı Fen Edebiyat Fakültesi
dc.description.abstractIn this study, we investigated the effect of excess sodium (Na) in a NaMnO2 structure using one-step heat treatment at 900 °C followed by quenching in liquid nitrogen (N₂). According to the X-ray diffraction (XRD) analysis, there was a competition between the monoclinic and orthorhombic phases, and we found that there were two monoclinic phases with similar structural properties. Therefore, we focused on revealing the formation of two isostructures of the monoclinic phase triggered by Na ions. We found that the lattice parameters and β angle changed from 113° to 105° in the samples with increasing Na content. Structural analysis of the powders using the XRD data was conducted using Rietveld refinement, and the phase ratios for all samples were calculated. The sample with x = 1.3 showed a 95% α-phase. To understand the formation of the two isostructures, we performed Density functional theory (DFT) calculations to examine their band structure, stability, and formation energy. A structural analysis of the excess Na-doped samples was performed using common techniques, and it was found that excess Na caused the formation of a coating on the grains in the form of sodium oxide. To validate this prediction, we conducted inductively coupled plasma mass spectrometry (ICP-MS), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy coupled with energy dispersive X-ray (SEM–EDX) analyses using the basic properties of these techniques and their interactions with materials. In the second part of the study, we produced HC from locally sourced olive leaves and investigated their structural properties. The electrochemical properties of the electrode materials were examined using a half-cell configuration as electrodes with Na metal and a full-cell configuration using x = 1.3 cathode and HC anode. A direct-contact pre-sodiation strategy was used as the anode in the full-cell measurements. It was found that the full cells had initial capacity values of 150 mAh/g for the voltage range 1.5–4.3 V and 120 mAh/g for the voltage range 1.5–3.5 V.
dc.identifier.doi10.1007/s42823-025-00942-2
dc.identifier.issn19764251
dc.identifier.scopus105009744403
dc.identifier.urihttps://dx.doi.org/10.1007/s42823-025-00942-2
dc.identifier.urihttps://hdl.handle.net/20.500.12451/13317
dc.identifier.wosWOS:001524830200001
dc.identifier.wosqualityQ2
dc.indekslendigikaynakScopus
dc.indekslendigikaynakWeb of Science
dc.institutionauthorÖzcan, Sibel
dc.language.isoen
dc.publisherSpringer
dc.relation.ispartofCarbon Letters
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectExcess Na
dc.subjectHC
dc.subjectNa-ion Full Cell
dc.subjectNaMnO2
dc.titleSodium-induced phase shift in α-NaMnO2 and electrochemical properties of the full cells using hard carbon anodes derived from regional olive leaves
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
dogan-ebru-2025.pdf
Boyut:
3.51 MB
Biçim:
Adobe Portable Document Format
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.17 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama: