Examining the machinability of 38MnVS6 microalloyed steel, cooled in different mediums after hot forging with the coated carbide and ceramic tool

Basit Öğe Kaydı
dc.contributor.authorÖzlü, Barış
dc.contributor.authorDemir, Halil
dc.contributor.authorTürkmen, Mustafa
dc.contributor.authorGürbüz, Süleyman
dc.date.accessioned2021-07-05T12:52:41Z
dc.date.available2021-07-05T12:52:41Z
dc.date.issued2021
dc.departmentTeknik Bilimler Meslek Yüksekokulu
dc.description*Özlü, Barış ( Aksaray, Yazar )
dc.description.abstractIn this study, the effect of the microstructure, hardness, and cutting speed on main cutting force and surface roughness in medium carbon microalloyed steel cooled in different mediums after hot forging, was investigated. As-received sample, which was not hot forged, and the samples cooled in the sand, air, oil, and polymerized water after hot forging were used for the experimental studies. The machinability tests were performed via turning method by using coated carbide and coated ceramic cutting tools with five cutting speed (120, 150, 180, 210, and 240?m/min), constant feed rate (0.04?mm/rev), and constant depth of cut (0.6?mm). The microstructure examinations of the samples were carried out and their hardness values were determined. Also, the wear of cutting tools were examined with scanning electron microscope. In the experimental study, it was revealed that the microstructure, hardness and cutting speed had a significant effect on the surface roughness values of the samples cooled in dissimilar environments following forging. Moreover, the samples cooled in air and polymerized water, whose hardness increased depending on the increase in the cooling rate, had the highest cutting force after machining by using the coated carbide and ceramic tool.
dc.identifier.doi10.1177/0954406220984498
dc.identifier.endpage-en_US
dc.identifier.issn0954-4062
dc.identifier.issue-en_US
dc.identifier.scopusqualityQ2
dc.identifier.startpage-en_US
dc.identifier.urihttps:/dx.doi.org/10.1177/0954406220984498
dc.identifier.urihttps://hdl.handle.net/20.500.12451/8333
dc.identifier.volume-en_US
dc.identifier.wosWOS:000683080100001
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSAGE Publications Ltd
dc.relation.ispartofProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectCutting Force
dc.subjectHot Forging
dc.subjectMicroalloyed Steel
dc.subjectMicrostructure and Hardness
dc.subjectSurface Roughness
dc.titleExamining the machinability of 38MnVS6 microalloyed steel, cooled in different mediums after hot forging with the coated carbide and ceramic tool
dc.typeArticle

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu