Estimation of Surface Roughness and Flank Wear in Milling of Inconel 625 Superalloy

Basit Öğe Kaydı
dc.contributor.authorAkgün, Mahir
dc.contributor.authorDemir, Halil
dc.date.accessioned2021-07-02T10:55:56Z
dc.date.available2021-07-02T10:55:56Z
dc.date.issued2021
dc.departmentTeknik Bilimler Meslek Yüksekokulu
dc.description*Akgün, Mahir ( Aksaray, Yazar )
dc.description.abstractThe main objective of this work is to experimentally investigate and statistically evaluate the effects of the milling parameters on surface roughness (Ra) and flank wear (Vb) in the milling of Inconel 625. Thus, milling experiments on different cutting conditions with Physical vapor deposition (PVD) and Chemical vapor deposition (CVD) coated inserts have been conducted on CNC milling machine according to Taguchi L18 orthogonal array. The effect levels of the milling conditions on Ra and Vb have been determined with analysis of variance (anova) at 95% confidence level. The analysis results indicate that the cutting tool is the most significant parameter affecting Ra while the feed rate is the most significant parameter affecting Vb. Then the linear and quadratic regression models have been applied in order to estimate Ra and Vb. The results show that a higher correlation coefficient (R2) is obtained via the quadratic regression model with a value of 0.97 for both Ra and Vb. Finally, the verification results are in excellent agreement with experimental findings, regarding the surface roughness (Ra), and tool wear (Vb).
dc.identifier.doi10.1142/S0218625X21500116
dc.identifier.endpage-en_US
dc.identifier.issn0218-625X
dc.identifier.issue4en_US
dc.identifier.scopusqualityQ3
dc.identifier.startpage-en_US
dc.identifier.urihttps:/dx.doi.org/10.1142/S0218625X21500116
dc.identifier.urihttps://hdl.handle.net/20.500.12451/8287
dc.identifier.volume28en_US
dc.identifier.wosWOS:000645140600009
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherWorld Scientific
dc.relation.ispartofSurface Review and Letters
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectInconel 625 Superalloy
dc.subjectMilling
dc.subjectOptimization
dc.subjectSurface Roughness
dc.titleEstimation of Surface Roughness and Flank Wear in Milling of Inconel 625 Superalloy
dc.typeArticle

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu