Failure analysis of laminated composite plates with two parallel pin-loaded holes

Basit Öğe Kaydı
dc.authoridAtaş, Akın -- 0000-0002-2185-465X
dc.contributor.authorAtaş, Akın
dc.contributor.authorArslan, Nurettin
dc.contributor.authorSen, Faruk
dc.date.accessioned13.07.201910:50:10
dc.date.accessioned2019-07-29T19:26:30Z
dc.date.available13.07.201910:50:10
dc.date.available2019-07-29T19:26:30Z
dc.date.issued2009
dc.departmentMühendislik Fakültesi
dc.description.abstractThe aim of this study is to research the failure loads and failure modes of laminated woven-glass-polyester composite plates with two parallel circular holes, which are subjected to traction forces by two rigid pins. The failure behavior of two parallel pin-loaded composite plates has been observed both experimentally and numerically with different geometries and fiber orientations. While the plate width to hole diameter ratio (W/D) was held constant; the distance from the free edge of the plate to hole diameter ratio (E/D) was changed from 1 to 5, and the distance between two parallel holes to hole diameter ratio (M/D) was varied from 2 to 5. Two different ply orientations were also investigated as [0 degrees](8) and [0 degrees(2)/60 degrees(2)/](s). In a numerical study, a three-dimensional finite element method (FEM) was used with the assistance of a LUSAS 13.6 finite element analysis program. Good agreement has been shown between experimental and numerical results.
dc.description.sponsorshipBalikesir University [2007/01]; Filiz Ozkan
dc.description.sponsorshipThis study was funded by Balikesir University under project number 2007/01. The authors express their thanks to Izoreel Firm in Izmir, Turkey. Special thanks to Dokuz Eylul University Mechanical Engineering Department, particularly Professor Onur Sayman, for their help and thoughts. Furthermore, we sincerely thank Filiz Ozkan for her support.
dc.identifier.doi10.1177/0731684408089493
dc.identifier.endpage1276en_US
dc.identifier.issn0731-6844
dc.identifier.issue10en_US
dc.identifier.scopusqualityQ1
dc.identifier.startpage1265en_US
dc.identifier.urihttps://doi.org/10.1177/0731684408089493
dc.identifier.urihttps://hdl.handle.net/20.500.12451/5619
dc.identifier.volume28en_US
dc.identifier.wosWOS:000266166800008
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSage Publications LTD
dc.relation.ispartofJournal of Reinforced Plastics and Composites
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectComposite Plate
dc.subjectBearing Strength
dc.subjectParallel Pin Loading
dc.subjectFailure Analysis
dc.titleFailure analysis of laminated composite plates with two parallel pin-loaded holes
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
atas-akin-2009.pdf
Boyut:
419.87 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu