The influences of geometrical parameters on the failure response of two serial pinned/bolted composite joints

Basit Öğe Kaydı
dc.contributor.authorŞen, F.
dc.contributor.authorSayman, O.
dc.date.accessioned13.07.201910:50:10
dc.date.accessioned2019-07-16T09:20:40Z
dc.date.available13.07.201910:50:10
dc.date.available2019-07-16T09:20:40Z
dc.date.issued2009
dc.departmentMühendislik Fakültesi
dc.description.abstractIn this study, the influences of geometrical parameters on the failure response of two serial pinned/bolted composite joints were analysed. The tested composite material consisted of epoxy matrix and glass fibres. It was oriented as [0 degrees/0 degrees/60 degrees/60 degrees](s), symmetrically. Three different geometrical parameters, which were the edge distance-to-hole diameter ratio (E/D), plate width-to-hole diameter ratio (W/D), and the distance between two serial holes-to-hole diameter ratio (K/D), were investigated, experimentally. Consequently, E/D, W/D, and KID ratios were designed from 1 to 5, 2 to 5, and 3 to 5, respectively. Additionally, the failure tests were performed for a range of preload moments as 2,3,4,5 Nm and without any preload moment as 0 Nm. Experimental results showed that the changing of geometrical parameters and the presence of preload moments affected failure behaviour of two serial pinned/bolted composite joints. Furthermore, the numerical failure analysis was also carried out via Lusas 13.6 code. Hashin failure criterion was preferred to determine both bearing strengths and failure modes. All in all, a good agreement is observed between experimental and numerical failure analyses.
dc.identifier.doi10.1243/14644207JMDA239
dc.identifier.endpage181en_US
dc.identifier.issn1464-4207
dc.identifier.issueL4en_US
dc.identifier.scopusqualityQ2
dc.identifier.startpage169en_US
dc.identifier.urihttps://doi.org/10.1243/14644207JMDA239
dc.identifier.urihttps://hdl.handle.net/20.500.12451/5112
dc.identifier.volume223en_US
dc.identifier.wosWOS:000271667400004
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherProfessional Engineering Publishing
dc.relation.ispartofProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectLaminated Plates
dc.subjectFailure Analysis
dc.subjectFailure Response
dc.subjectBolted Joints
dc.subjectPinned Joints
dc.titleThe influences of geometrical parameters on the failure response of two serial pinned/bolted composite joints
dc.typeArticle

Dosyalar

Koleksiyon

Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu