Optimization of limestone sawing using circular saws with reference to unit wear and energy

Basit Öğe Kaydı
dc.contributor.authorBayram, Fatih
dc.contributor.authorYaşıtlı, Nazmi Erhan
dc.contributor.authorKulaksız, Seyfi
dc.contributor.authorÖzçelik, Yılmaz
dc.date.accessioned13.07.201910:50:10
dc.date.accessioned2019-07-29T19:29:39Z
dc.date.available13.07.201910:50:10
dc.date.available2019-07-29T19:29:39Z
dc.date.issued2013
dc.departmentMühendislik Fakültesi
dc.description.abstractNatural stone processing operations use different methods and machines; however, the circular sawing machines are widely used in natural stone processing since they can be used flexibly. The wear on the diamond segments on the sawblade and energy consumption are the important parameters for these machines. Unit wear and unit energy should be minimized and the sawing rate should be maximized for optimum sawing condition. In this study sawing tests were performed on limestone samples using a fully automatic circular sawing machine. The tests were conducted at different peripheral speeds and advance rates. For each sawing test, the segment wear and consumed energy were measured. The statistical software, Design Expert 7.0 was used to analyze the test data. The new sawability charts for wear and energy were developed. The unique aspect of this study is to determine the optimum circular sawing performance with the special software and this technique also provides the prediction of unit wear and unit energy for selected sawing condition.
dc.description.sponsorshipTUBITAK (The Scientific and Technological Research Council of Turkey) [104M384]
dc.description.sponsorshipThis work was supported by TUBITAK (The Scientific and Technological Research Council of Turkey) project, named Sawability Classification of Some Natural Stones with Circular Sawing and Numerical Modeling of Sawing Mechanism [grant number 104M384].
dc.identifier.doi10.1177/0954406212451067
dc.identifier.endpage1079en_US
dc.identifier.issn0954-4062
dc.identifier.issueC5en_US
dc.identifier.scopusqualityQ2
dc.identifier.startpage1069en_US
dc.identifier.urihttps://doi.org/10.1177/0954406212451067
dc.identifier.urihttps://hdl.handle.net/20.500.12451/6192
dc.identifier.volume227en_US
dc.identifier.wosWOS:000318179400015
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSAGE PUBLICATIONS
dc.relation.ispartofPROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectNatural Stone Processing
dc.subjectCircular Sawing
dc.subjectUnit Wear
dc.subjectUnit Energy
dc.subjectSawability Charts
dc.subjectOptimization
dc.titleOptimization of limestone sawing using circular saws with reference to unit wear and energy
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
bayram-fatih-2013.pdf
Boyut:
643.24 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu