Modeling, analysis and simulation of a high-efficiency battery control system
| dc.contributor.author | Alkhafaji, Mohammed Ayad | |
| dc.contributor.author | Uzun, Yunus | |
| dc.date.accessioned | 2023-03-10T08:29:40Z | |
| dc.date.available | 2023-03-10T08:29:40Z | |
| dc.date.issued | 2023 | |
| dc.department | Mühendislik Fakültesi | |
| dc.description.abstract | This paper explains step-by-step modeling and simulation of the full circuits of a battery control system and connected together starting from the AC input source to the battery control and storage system. The three-phase half-controlled rectifier has been designed to control and convert the AC power into DC power. In addition, two types of direct current converters have been used in this paper which are a buck and bidirectional DC/DC converters. These systems adjust the output voltage to be lower or higher than the input voltage. In the buck converters, the main switch operates in conduction or cut-off mode and is triggered by a Pulse-Width Modulated (PWM) signal. The output and input voltage levels ratio are used to calculate the PWM signal’s duty cycle. Therefore, the duty cycle indicates the operation mode of the converter in steady-state operation. In this study, we analyze and control of a buck converter with the PWM signal. Besides, the bidirectional DC/DC converter has been achieved and optimized by PI control methods to control the battery charging and discharging modes. The simulation has been applied via the Matlab/Simulink environment. The results show the activity of each part of the designed circuits starting from the converters and the battery control system in charge and discharge modes. | |
| dc.identifier.doi | 10.32604/cmes.2023.024236 | |
| dc.identifier.endpage | 732 | en_US |
| dc.identifier.issn | 1526-1492 | |
| dc.identifier.issue | 1 | en_US |
| dc.identifier.scopusquality | Q2 | |
| dc.identifier.startpage | 709 | en_US |
| dc.identifier.uri | https:/dx.doi.org/10.32604/cmes.2023.024236 | |
| dc.identifier.uri | https://hdl.handle.net/20.500.12451/10327 | |
| dc.identifier.volume | 136 | en_US |
| dc.identifier.wos | WOS:000950631200012 | |
| dc.identifier.wosquality | Q2 | |
| dc.indekslendigikaynak | Web of Science | |
| dc.indekslendigikaynak | Scopus | |
| dc.language.iso | en | |
| dc.publisher | Tech Science Press | |
| dc.relation.ispartof | CMES - Computer Modeling in Engineering and Sciences | |
| dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | |
| dc.rights | Attribution-NonCommercial-NoDerivs 3.0 United States | * |
| dc.rights | info:eu-repo/semantics/openAccess | |
| dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/us/ | * |
| dc.subject | Battery Controller | |
| dc.subject | Bidirectional DC/DC Converter | |
| dc.subject | Buck Converter | |
| dc.subject | PI Controller | |
| dc.subject | Pulse-Width Modulation (PWM) | |
| dc.subject | Rectifier | |
| dc.title | Modeling, analysis and simulation of a high-efficiency battery control system | |
| dc.type | Article |
