Experimental investigation of cutting parameters in machining of 100Cr6 with tangential turn-milling method

Basit Öğe Kaydı
dc.contributor.authorSavaş, Vedat
dc.contributor.authorÖzay, Çetin
dc.contributor.authorBallıkaya, Hasan
dc.date.accessioned13.07.201910:50:10
dc.date.accessioned2019-07-16T08:21:51Z
dc.date.available13.07.201910:50:10
dc.date.available2019-07-16T08:21:51Z
dc.date.issued2016
dc.departmentTeknik Bilimler Meslek Yüksekokulu
dc.description.abstractThe turn-milling methods for machining operation have been developed to increase efficiency of conventional machines recently. These methods are used especially by coupling some apparatuses on the computer numerical control (CNC) machine to decrease the production time and machine costs, ensure the maximum production and increase the quality of machining. In this study, 100Cr6 bearing steel extensively used in industry has been machined by tangential turn-milling method. This paper presents an approach for optimization of the effects of the cutting parameters including cutter speed, workpiece speed, axial feed rate, and depth of cut on the surface roughness in the machining of 100Cr6 steel with tangential turn-milling method by using genetic algorithm (GA). Tangential turning-milling method has been determined to have optimum effects of cutting parameters on the machining of 100Cr6 steel. The experimental results show that the surface roughness quality is close to that of grinding process
dc.identifier.doi10.1007/s40436-016-0134-9
dc.identifier.endpage104en_US
dc.identifier.issn2095-3127
dc.identifier.issue1en_US
dc.identifier.scopusqualityQ1
dc.identifier.startpage97en_US
dc.identifier.urihttps://dx.doi.org/10.1007/s40436-016-0134-9
dc.identifier.urihttps://hdl.handle.net/20.500.12451/2373
dc.identifier.volume4en_US
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherShanghai University Press
dc.relation.ispartofAdvances in Manufacturing
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subject100Cr6
dc.subjectGenetic Algorithm (GA)
dc.subjectSurface Roughness
dc.subjectTangential Turn-milling
dc.titleExperimental investigation of cutting parameters in machining of 100Cr6 with tangential turn-milling method
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
savas-vedat-2016.pdf
Boyut:
1.21 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu