Failure analysis of simple overlap bonding joints and numerical investigation of the adhered tip geometry effect on the joint strength

Basit Öğe Kaydı
dc.contributor.authorSaraç, İsmail
dc.date.accessioned2022-01-26T06:03:37Z
dc.date.available2022-01-26T06:03:37Z
dc.date.issued2021
dc.departmentMühendislik Fakültesi
dc.description.abstractThis study was carried out in two stages. In the first step, a numerical study was performed to verify the previous experimental study. In accordance with the previous experimental study data, single lap joints models were created using the ANSYS finite element analysis program. Then, nonlinear stress and failure analyses were performed by applying the failure loads obtained in the experimental study. The maximum stress theory was used to find finite element failure loads of the single lap joints models. As a result of the finite element analysis, an approximate 80 % agreement was found between experimental and numerical results. In the second step of the study, in order to increase the bond strength, different overlap end geometry models were produced and peel and shear stresses in the adhesive layer were compared according to the reference model. As a result of the analyses, significant strength increases were calculated according to the reference model. The strength increase in model 3 and model 5 was found to be 80 % and 67 %, respectively, relative to the reference model.
dc.identifier.endpage1011en_US
dc.identifier.issn0025-5300
dc.identifier.issn2195-8572
dc.identifier.issue11en_US
dc.identifier.startpage1007en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12451/9154
dc.identifier.volume63en_US
dc.identifier.wosWOS:000720349900006
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.language.isoen
dc.publisherWalter de Gruyter GmbH
dc.relation.ispartofMaterials Testing
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectSingle Lap Joints
dc.subjectAdherend Tip Geometry
dc.subjectNonlinear Stress Analysis
dc.subjectFailure Analysis
dc.subjectFinite Elements
dc.titleFailure analysis of simple overlap bonding joints and numerical investigation of the adhered tip geometry effect on the joint strength
dc.typeArticle

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Makale Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu