Analysis of dickson voltage multiplier for RF energy harvesting
Yükleniyor...
Tarih
2019
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Institute of Electrical and Electronics Engineers Inc.
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
This paper presents the RF energy harvesting parameters depending on the efficiency and the output DC voltage for input powers between-35dBm to 25dBm. In this study, multi-stage Dickson voltage multiplier (DVM) from 2 to 6-stages are designed and implemented with various load resistance i.e. 20-50-100-500 k? and different matching topology such L-matching, T-matching, and Pi-matching are applied, and also two Schottky diode models (e.g. HSMS-2852 and HSMS-2822) are used to design the DVM to see their effect on the efficiency. All the simulations are done by using the Advance Design System (ADS) 2017. The target frequency selected in the design is 915 MHz for Industrial, Scientific and Medical Radio Band (ISM band). The simulation results show that high efficiency and high output DC voltage are obtained for the DVM circuit design with matching compared to the DVM circuit without matching for low input power.
...
...
Açıklama
Anahtar Kelimeler
Digital Voltmeters, Frequency Multiplying Circuits, Integrated Circuit Manufacture, Impedance Matching (Electric), Schottky Barrier Diodes
Kaynak
2019 1st Global Power, Energy and Communication Conference (IEEE GPECOM2019)
WoS Q Değeri
Scopus Q Değeri
N/A
Cilt
-
Sayı
-
