Show simple item record

dc.contributor.authorDoǧan, Meral
dc.contributor.authorİrem Yeşilyurt, F.
dc.contributor.authorAlaygut, Doğan
dc.contributor.authorBuckner, Ira S.
dc.contributor.authorÜmran Doğan, A.
dc.contributor.authorWurster, Dale Eric
dc.date.accessioned2019-07-12T07:21:29Z
dc.date.available2019-07-12T07:21:29Z
dc.date.issued2007en_US
dc.identifier.issn0009-8604
dc.identifier.issn1552-8367
dc.identifier.urihttps://dx.doi.org/10.1346/CCMN.2007.0550508
dc.identifier.urihttps://hdl.handle.net/20.500.12451/2199
dc.descriptionİrem Yeşilyurt, F. ( Aksaray, Yazar )en_US
dc.description.abstractThe Clay Minerals Society published a complete characterization scheme for its ‘Source Clays’ but not for its ‘Special Clays’. To address this issue, the specific surface areas (SSAs) of the 16 special clays from The Clay Minerals Society were determined using the Brunauer, Emmett and Teller (BET) method of adsorption of an inert gas. Two BET measurements were performed for each of the 16 special clays, and the average BET SSA of each of the special clays was determined. The BET SSA of cookeite is reported for the first time. In the present study, special clays from The Clay Minerals Society are classified under three groups based on their BET special surface area values as Group-I special clays, with BET values of 0.1–10 m2/g, Group-II special clays, with BET values of 10–100 m2/g, and Group-III special clays, with BET values >100 m2/g. Comparisons which proved interesting were the those involving the mixed-layer clays and the synthetic clays. The systematic approach employed in this paper will allow for better comparisons to be made between different clays and will provide a comprehensive database for future applications of such material (e.g. as catalyst carriers, as adsorbents in waste treatments, etc.).en_US
dc.description.abstract...en_US
dc.language.isoengen_US
dc.publisherClay Minerals Societyen_US
dc.relation.isversionof10.1346/CCMN.2007.0550508en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBeidelliteen_US
dc.subjectBETen_US
dc.subjectCookeiteen_US
dc.subjectIlliteen_US
dc.subjectIllite-smectiteen_US
dc.subjectMontmorilloniteen_US
dc.subjectNontroniteen_US
dc.subjectRectoriteen_US
dc.subjectRipidoliteen_US
dc.subjectSpecial Claysen_US
dc.subjectSpecific Surface Areaen_US
dc.subjectSynthetic Hectoriteen_US
dc.subjectLaponiteen_US
dc.titleBaseline studies of the clay minerals society special clays: Specific surface area by the Brunauer Emmett Teller (BET) methoden_US
dc.typearticleen_US
dc.relation.journalClays and Clay Mineralsen_US
dc.contributor.departmentMimarlık ve Tasarım Fakültesien_US
dc.identifier.volume55en_US
dc.identifier.issue5en_US
dc.identifier.startpage534en_US
dc.identifier.endpage541en_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record