Search
Now showing items 1-10 of 19
Application of the taguchi method to select the optimum cutting parameters for tangential cylindrical grinding of AISI D3 tool steel
(Institute of Metals Technology, 2016)
The purpose of this research was an analysis of the optimum cutting conditions for the lowest surface roughness in tangential cylindrical grinding of the AISI D3 tool steel using the Taguchi method. In this experimental ...
Experimental investigation of cutting parameters in machining of 100Cr6 with tangential turn-milling method
(Shanghai University Press, 2016)
The turn-milling methods for machining operation have been developed to increase efficiency of conventional machines recently. These methods are used especially by coupling some apparatuses on the computer numerical control ...
Optimization of surface roughness in turning Mg2Si particle reinforced magnesium
(Gazi Üniversitesi, 2018)
In this study, Mg2Si reinforced Mg alloy material was produced by adding 10 % Al12Si alloy ingot to Mg matrix by conventional casting method and then the melt was poured into a metal mould in cylindrical form. Machining ...
Optimization of cutting parameters affecting surface roughness in turning of inconel 625 superalloy by cryogenically treated tungsten carbide inserts
(Springer International Publishing, 2021)
This work focuses on developing the mathematical model of surface roughness (Ra) in the turning of Inconel 625 superalloy with cryogenically treated tungsten carbide inserts. The influence of cryogenic treated on the ...
Estimation of Surface Roughness and Flank Wear in Milling of Inconel 625 Superalloy
(World Scientific, 2021)
The main objective of this work is to experimentally investigate and statistically evaluate the effects of the milling parameters on surface roughness (Ra) and flank wear (Vb) in the milling of Inconel 625. Thus, milling ...
Hızlı prototipleme teknolojisi harç yığma yöntemi ile üretilen modellerin ölçüsel sapmalarının ve yüzey pürüzlülüğünün incelenmesi
(Erzincan Üniversitesi, 2020)
Bu çalışmada, farklı geometrik toleranslarda ve ölçülerde model tasarımı yapılmıştır. Tasarlanan model, hızlı prototip üretim uygulamalarından harç yığma tekniği kullanılarak üretilmiştir. Model üretimi sırasında farklı ...
Experimental and statistical investigation of the effects of cutting parameters on kerf quality and surface roughness in laser cutting of al 5083 alloy
(World Scientific, 2021)
In this study, the effect of cutting parameters on kerf quality and surface roughness in laser cutting of Al 5083 alloyed material was investigated both experimentally and statistically (Taguchi & Gray Taguchi). Experimental ...
Examining the machinability of 38MnVS6 microalloyed steel, cooled in different mediums after hot forging with the coated carbide and ceramic tool
(SAGE Publications Ltd, 2021)
In this study, the effect of the microstructure, hardness, and cutting speed on main cutting force and surface roughness in medium carbon microalloyed steel cooled in different mediums after hot forging, was investigated. ...
AISI 310 kalite östenitik paslanmaz sac malzemenin lazerle kesilmesinde kesme parametrelerinin kesim kalitesine etkisinin incelenmesi
(Iğdır Üniversitesi, 2020)
Yapılan çalışmada, AISI 310 paslanmaz sac malzemesinin lazer tezgâhında kesilmesiyle kesmeparametrelerinin yüzey pürüzlülüğü ve kerf genişliğine etkileri araştırılmıştır. Lazer kesme deneyleri iki farklı gazbasıncı (0.8 ...
Optimization of process parameters affecting cutting force, power consumption and surface roughness usıng taguchi-based gray relatıonal analysıs in turnıng aısı 1040 steel
(World Scientific, 2022)
This study focuses on optimization of cutting conditions and modeling of cutting force (Fc), power consumption (P), and surface roughness (Ra) in machining AISI 1040 steel using cutting tools with 0.4mm and 0.8mm nose ...
